Mini-GASS2812采样处理系统

更多信息:

博纯唯一完整的便携式加热气体采样预处理系统

我们便携式Mini-GASS™ 系统为高性能气体分析提供热的样气流，为烟气测试和间歇使用而设计。包含手提箱。

许多气体分析仪由于水和水气的进入后的堵塞和腐蚀,遇到了性能下降和维护的问题。Mini-GASS系统可以在远远低于露点情况下去除水分,一般能达到-25℃的露点。

Mini-GASS装置提供了多种选择和配置，包括直接安装在烟道上，那样几乎就不需要加热管线。适用于防爆Class I, Division II环境。自动排水器安装于过滤器上用于去除酸雾。可以配置采样泵来创造一个完全独立的系统。

Mini-GASS系统是连续排放和过程监测系统应用的理想选择。设计用来处理高腐蚀性和高难度采样含高含量的HCl,HF，NOx或SOx。

性能包含:

1 – 压力
115 VAC, 50/60 Hz	1A
230 VAC, 50 Hz	2A
2 – 滑水材料 / 入口类型
Fluorocarbon	F
Stainless Steel	S
3 – 过滤器排出口
Manual drain valve assembly, for vacuum drain, includes a Teflon eductor with 0.040″ Teflon nozzle and a Polypropylene check valve to prevent backflow	V
Manual drain valve assembly, for pressure drain (not available in Kynar), includes a Toggle valve to manually drain coalesced liquids	P

4 – 干燥管 (要求选项)
50 tube Nafion gas dryer, 24″ long, Small dryer for LOW sample flow rates (1 lpm or less)	05
100 tube Nafion gas dryer, 24″ long; Medium dryer for MODERATE sample flow rates (2-3 lpm)	10
200 tube Nafion gas dryer, 24″ long; Large dryer for HIGH sample flow rates (4-6 lpm)	20
5 – 吹扫气体干燥管或样气泵
Heatless dryer for purge air; req’d when instrument air is unavailable	HD
Sample pump, 5 LPM	P
6 – 吹扫射流泵
Req’d when sample is under vacuum of more than 5″ of water; prevents collapse of dryer tubing by reducing pressure of the purge air	ED

ITEM #	描述
MG-DTC	Digital temperature controller, single channel
MG-TCS	Thermocouple
MG-SSR	Solid state relay
MG-FM	Flow meter, purge gas (0-60 L/min)
MG-PR	Pressure regulator, purge gas or eductor
MG-DPS	Differential pressure switch
MG-PG-0-30	Pressure gage, purge gas (0-30 PSI)
MG-VG-0-60	Vacuum gage, purge eductor (0-30″Hg)
SV-K10	Safety interlock solenoid valve, Kynar, 110V/60Hz
SV-K20	Safety interlock solenoid valve, Kynar, 220V/50Hz
FF-DCV	Drain check valve, Teflon, for vacuum drain
DVV-B10	Drain solenoid valve, brass, for vacuum drain 110V/60Hz
DVV-B20	Drain solenoid valve, brass, for vacuum drain 220V/50Hz
DVP-K10	Drain solenoid valve, Kynar, for pressure drain 110V/60Hz
DVP-K20	Drain solenoid valve, Kynar, for pressure drain 220V/50Hz
MG-DVT	Drain valve timer
MG-DC	Mounting clamps for dryer (specify dryer model)
MG-HB200T	Heater blocks for PD-200T, 1 pair
MG-1412-HB	Backplate with heater for enclosure 1412
MG-2112-HB	Backplate with heater for enclosure 2112
PD-50T-24E	50 tube dryer replacement element, 24″ long, includes o-rings
PD-100T-24E	100 tube dryer replacement element, 24″ long, includes o-rings
PD-200T-24E	200 tube dryer replacement element, 24″ long, includes o-rings
FF-250-E-2.5G	Replacement filter element
FF-250-G	Replacement glass shell
FF-250-3	Replacement o-ring set, set of 3
AS-200-08-EB	Media replacement for ammonia scrubber, bulk supply, 5 fillings
MG-PUMPKIT	Pump repair kit, Teflon diaphragm